On 17 November 2026 at 07:08 UTC the Navo24 fleet endpoint returned the last-known positions of 2,745 container ships. 1,006 reported under one knot. 25 reported 20 knots or more. The median sat at 10.4 knots. Each row holds the IMO number, name, position, heading, speed and the time of the last fix. For 2,705 ships that fix was within six hours. That is where shore-side container ship performance monitoring starts.
What does a snapshot of 2,745 container ships tell a monitor?
Split by speed, 326 ships ran from one to under ten knots. 724 ran from ten to under fifteen. 664 ran from fifteen to under twenty. Only 25 ran faster. The 1,006 near standstill are consistent with ships at berth or at anchor. The other 40 ships carried a fix older than six hours. The speed column cannot tell a berth from an old fix.
Take one ship. MSC LORETO is 399 metres long and carries 24,346 TEU. Built in 2023, Liberian flag, operated by Mediterranean Shipping Company. At 17:42 UTC the same day, ten and a half hours after the snapshot, her live fix on the vessel endpoint read 16.7 knots, status under way using engine. Speed and status together show she is moving. Position, heading and fix time come in the same response.
The fleet endpoint’s documented fields do not include fuel burn, draft, engine load or weather. Nothing below the waterline is in the data. The fleet endpoint returned 2,745 rows with none of it.
Why does hull fouling hide from a speed feed?
A scenario analysis in Applied Ocean Research (volume 165, December 2025) ran 52,636 vessels across six ship types and assumed no hull maintenance for a year. It found that moderate hull fouling can raise annual fuel use and greenhouse gas emissions by 20 to 30 percent on average. In the medium fouling scenario a container ship of 15,000 TEU or more emits about 20,000 tons of extra CO2 a year. MSC LORETO belongs to that size class. The study gives no figure for her. Here the average is the mean across the simulated fleet under a no-maintenance scenario. The authors read it as the size of the risk from delayed maintenance, not as an unavoidable average for every operating environment.
Speed matters to the penalty, since the study ties it to speed, ship size, idle time and hull roughness. The feed holds no fuel figure to pair with a speed. No fouling figure follows from it.
ISO 19030 exists for that gap. Its first part and the two that follow define indicators for changes in hull and propeller performance. They compare a ship with itself over time. The comparison is the same hull on an earlier date, for ships with conventional fixed pitch propellers. Part 3 lists alternative methods that allow speed over ground as a proxy for speed through water, with reduced accuracy, and currents add uncertainty. Part 2 sets a minimum acquisition rate of once every 15 seconds for speed through water, which a speed log measures directly, and for speed over ground. A last-known position on a shore-side table has no such log.
Who acts on container ship performance monitoring when the numbers turn bad?
The shipping company does. Under the IMO measures, CII applies to ships of 5,000 gross tonnage and above. Carbon intensity is rated A, B, C, D or E. A is the best. The rating is recorded in a Statement of Compliance. A ship rated D for three consecutive years, or E for one year, has to submit a corrective action plan. It shows how the ship will reach C or above. More fuel for the same voyage pushes the rating the wrong way.
For a cargo owner the practical step is smaller. Ask the carrier or shipping company for the rating of the ship booked on the lane. Then compare the booked ETA with the ship’s actual movement. The fleet data covers the movement. The rating lies outside it, and nothing in the papers behind this article ties one ship’s speed reading to its fouling penalty. Nothing in the IMO FAQ promises a cargo owner access to the rating, so asking is a suggestion, not a right.
Frequently asked questions
Does the EEXI cover smaller ships than the CII rating does?
Yes. The IMO says EEXI generally applies to each ship of 400 gross tonnage and above, a much lower threshold than the 5,000 gross tonnage for CII.
Is ISO 19030 still current?
ISO lists parts 2 and 3 of the 2016 series as last reviewed and confirmed in 2022, so the standard remains in force.
Does regular hull cleaning remove the fouling penalty?
The study states that timely maintenance events can mitigate the penalties it models. It models a low-fouling scenario with effective control, but no figure for any one ship cleaned on schedule.
