Skip to content
Navo24Navo24
Freight data for fashion supply chains

Fashion logistics.

Fashion freight runs to fixed season and drop dates, mixes air and sea on the same style, and ships garments on hangers alongside boxed footwear into marketplace and retail DCs. Navo24 gives shippers and forwarders container and air tracking, schedules, rates, load plans and reference data to plan that mix.

Factory cfb in Portugal for garment clothing

Overview

Most fashion volume leaves Asian production hubs such as Chittagong, Ho Chi Minh City, Shanghai, Ningbo and Yantian, or Turkey and Portugal for Europe, in 40 ft high cube containers. Folded goods and boxed footwear go floor-loaded or palletised in cartons. Garments on hangers travel in containers fitted with hanging bars, or in cartons with fixed rails. Late replenishment and urgent styles move by air in LD3 units or on pallets, so one style is often split between modes.

Trouble starts when a vessel slips, a transhipment is missed or a container is held at the terminal, and the season or floor-set date does not move with it. Planners then decide between waiting and booking air at short notice. Live container position, predicted ETA, carrier schedules, rate history and a checked load plan let that decision be made days earlier, with figures instead of guesses.

What goes wrong today

01

Fixed drop dates, moving vessels

A vessel that loses three or four days at a congested port can push a style past its launch or floor-set date. By the time the delay is confirmed by the carrier, the air capacity that could have recovered it is often booked or priced at a premium.

02

Hangers and boxes load differently

Garments on hangers need rail space and headroom, while shoe cartons are dense and stack by crush strength. Mixing them without a plan gives creased goods at the door end or a container that is full by volume yet light on cartons.

03

Narrow DC appointment windows

Marketplace and retail DCs book dock slots by PO and often charge for missed appointments. When one container of a split order is late, the rest of the PO can wait at the DC or be refused.

04

Air and sea split on one style

Splitting a style between a sea container and an air pallet means two tracking numbers, two ETAs and two sets of paperwork. Air is charged on the higher of actual or volumetric weight at 6,000 cm³ per kg, so bulky garments cost more than expected.

What Navo24 gives you

TrackingMCP

Track every container against its drop date

TrackingMCP follows containers across 240+ carriers and shows a predicted ETA alongside the carrier ETA, so a slipping vessel is visible early. Free-time and demurrage alerts help you pull containers to the DC before storage and detention charges start.

  • Predicted ETA against the drop date
  • Alerts on free time and demurrage
  • API and webhooks into your PO system
Open TrackingMCP
SchedulesMCP

Pick sailings that protect the season

SchedulesMCP lists sailings, cut-offs and transshipment points, with carrier on-time reliability for each service. Use it to choose a direct call over a double transshipment for styles with no slack, and to see the next departure if a sailing is blanked.

  • Cut-offs and transshipment points per sailing
  • On-time reliability by carrier and service
  • Backup departures if a sailing is blanked
Open SchedulesMCP
LoadingMCP

Plan hangers and cartons before stuffing

LoadingMCP builds a 3D plan of cartons, pallets and crates for containers and trucks, so footwear cartons and folded goods fill the box without crushing the bottom layer. Use it to compare carton counts per 40 ft high cube and to check the weight limit before the VGM is declared.

  • Carton and pallet fit per container
  • Weight and stacking checked before stuffing
  • Compare 40 ft and 40 ft high cube plans
Open LoadingMCP
AirCargoMCP

Follow the air leg on the same style

AirCargoMCP puts air waybill events from different airlines into one timeline, so an urgent replenishment pallet can be checked next to the sea container carrying the rest of the style. Planners see whether the air leg will reach the DC inside the appointment window.

  • One timeline across airlines
  • Flight and handover events by AWB
  • Air and sea legs side by side
Open AirCargoMCP

How it works with Navo24

  1. Plan the mix before booking

    Compare sailings, cut-offs and indicative rates in Navo24, then use the load planner to see how many hanger and carton units fit each container.

  2. Book and add numbers to tracking

    Add the booking, container or AWB number to tracking, with the DC appointment date, so each shipment is measured against its real deadline.

  3. Watch ETAs against drop dates

    Check predicted ETAs, vessel position and port dwell, and decide early whether a late sea container needs an air top-up.

  4. Time the release and DC delivery

    Use free-time and demurrage alerts to schedule pick-up and haulage so containers reach the DC inside the booked slot, then return empties to the right depot.

Rules and standards that apply

SOLAS VGM (Chapter VI, Regulation 2)

Every packed container needs a verified gross mass before loading, so dense footwear cartons must be weighed and declared correctly or the box can be refused.

IMO/ILO/UNECE CTU Code

Guidance on packing, blocking and securing cargo in containers, which applies to hanger rails, carton stacks and moisture control for garments.

Incoterms 2020 (FOB, FCA, DAP, DDP)

The chosen rule decides who books the sailing, who bears risk during a delay and who pays DC delivery and import duty on the goods.

HS Chapters 61, 62 and 64

Knitted apparel, woven apparel and footwear are classified in these chapters, and the code drives duty rates, origin claims and customs declarations.

IATA volumetric weight rule

Air freight is charged on the greater of actual weight or volume at 6,000 cm³ per kg, which makes bulky garments and shoe boxes costly by air.

Questions

How do I track a fashion container to meet a drop date?

Enter the container, booking or bill of lading number and compare the predicted ETA with your drop or floor-set date. Add the DC appointment as the real deadline so a slipping vessel is flagged while air backup is still possible.

How are garments on hangers shipped in a container?

Garments on hangers go in containers fitted with hanging bars, usually 40 ft or 40 ft high cube, or in cartons with built-in rails. The packing plan must leave headroom and prevent swinging, because creasing and crushed cartons are the main causes of claims.

How is air freight charged for apparel?

Airlines charge on the greater of actual or volumetric weight, calculated at 6,000 cm³ per kg, or 167 kg per m³. Garments and shoe boxes are usually light for their volume, so the volumetric weight normally sets the price.

Which HS codes apply to clothing and footwear?

Knitted or crocheted apparel falls in HS Chapter 61, other apparel in Chapter 62 and footwear in Chapter 64. The exact subheading depends on fibre, construction and, for shoes, the upper and sole materials.

What happens if one container of a split PO arrives late?

Many DCs book dock slots by PO and may hold or reject a partial delivery, and some charge for missed appointments. Tracking all containers of a PO together shows early which one will miss the window, so you can rebook the slot or move part of the goods by air.