Skip to content
Navo24Navo24
Freight data for MedTech

MedTech logistics.

Medical devices move as high-value, time-sensitive freight, from heavy imaging systems and sterile consumables to implants and urgent spare parts, often across several modes. Navo24 provides tracking, schedules, load plans and reference data so shippers and forwarders can see where a consignment is and plan the next leg.

I took this photo on a quiet August 2011 day in Anchorage, Alaska after all my chores were done. What a nice way to relax between working on

Overview

Medical devices travel by whatever mode meets the date the hospital has fixed. Imaging systems such as CT and MRI units go by sea in 40 ft high cube containers or by air on main deck positions of freighters, then by air-ride truck to site. Implants and sterile consumables go in small consignments on scheduled air freight, in PMC pallets and lower deck ULDs, finishing on a courier van. Spare parts ride on whatever passenger or freighter flight leaves first.

Problems start at the handover. A transfer missed at a hub, a unit load device that does not suit the aircraft deck, or an air waybill that stops updating all leave the consignee guessing. Navo24 puts air waybill events, sailings and load plans in one place, so a planner can see the last confirmed event, check the next departure and decide whether to rebook before the installation slot or surgery list is affected.

What goes wrong today

01

Heavy, tall, shock-sensitive imaging systems

A CT gantry or MRI magnet can exceed the door or contour limits of a lower deck ULD and may need a main deck position or a nose door freighter. Choosing the wrong deck, container or trailer height forces a rebooking, and the hospital's installation date does not move with it.

02

No view of the spare part's flight

A field engineer waiting on a part usually has an air waybill number and little else. Without flight, offload and transfer events in one timeline, the engineer cannot tell whether the part is on the next departure or still at the origin warehouse.

03

Small consignments, large consequences

An implant set or a box of sterile consumables may be one piece on a pallet of mixed freight. One missed connection leaves a surgery list without stock, and the cause sits somewhere between the forwarder, the airline and the handling agent.

04

Mixed modes and fixed delivery windows

A typical move combines a collection truck, an airport transfer, a flight, customs clearance and an air-ride delivery, each with its own cut-off. A delay at one leg reaches the next only if someone sees it in time to rebook.

What Navo24 gives you

AirCargoMCP

Follow every air waybill to the hospital

Spare parts, implants and consumables mostly fly, and the air waybill is the thread that links the airline, the forwarder and the handling agent. AirCargoMCP shows airline events for an air waybill in one timeline, so service teams can see whether a part is booked, departed, transferred or ready for collection.

  • Air waybill events from many airlines in one timeline
  • Spot a missed transfer before the site does
  • Share one status with engineers and consignees
Open AirCargoMCP
LoadingMCP

Plan imaging loads before booking

LoadingMCP builds a 3D plan of crates, pallets and cartons in containers and trucks, so height, weight and stacking limits are checked before the equipment is booked. For consumables it shows how many pallets fit a trailer, and how cartons sit on a pallet.

  • Check crate height against container and trailer
  • Keep heavy crates low and centred
  • Compare pallet counts for consumable shipments
Open LoadingMCP
SchedulesMCP

Pick sailings that match the install date

Sea freight suits imaging systems with a fixed installation date and enough lead time. SchedulesMCP shows sailings, cut-offs, transshipment points and carrier on-time reliability, so the planner can work back from the hospital's date and leave a buffer.

  • Work back from the installation date
  • See cut-offs and transshipment ports
  • Compare carrier on-time reliability
Open SchedulesMCP
TrackingMCP

Track sea legs of equipment shipments

When a scanner or a batch of consumables moves in a container, TrackingMCP follows the box across carriers and gives predicted ETAs. Alerts and webhooks tell the customs broker and the delivery haulier when to act.

  • Predicted ETA for the discharge port
  • Webhooks to your own systems
  • Free-time alerts before demurrage starts
Open TrackingMCP

How it works with Navo24

  1. Check size and mode

    Enter crate and pallet dimensions in the load planner and check them against the container, trailer or aircraft deck you plan to use.

  2. Match the leg to the date

    Compare sailings, cut-offs and flight options, then book the mode that leaves a buffer before the installation date or surgery list.

  3. Follow the consignment

    Track the air waybill or container number and share one status page with service, clinical and warehouse teams.

  4. Act on the first deviation

    If a transfer is missed or an ETA slips, see the next departure straight away and rebook or tell the hospital while there is still time.

Rules and standards that apply

EU MDR 2017/745 and IVDR 2017/746

Distributors and importers must make sure storage and transport conditions follow the manufacturer's instructions, so handling limits on the label need to reach the carrier.

ISO 13485

The quality management standard for medical device makers expects controlled storage, handling and distribution records, which in practice means a traceable trail of shipment events.

ISO 11607

Packaging for terminally sterilised devices must keep the sterile barrier intact through handling and transport, which is why sterile consumables are not stacked under heavy freight.

IATA Dangerous Goods Regulations

Devices and spare parts containing lithium batteries (UN3480, UN3481) or magnetised material need correct declaration and packing before they are accepted by an airline.

Montreal Convention

Airline liability for international carriage is limited to 22 SDR per kilogram unless a higher value is declared, which matters for high-value equipment.

Questions

How are MRI and CT scanners shipped internationally?

They go by sea in high cube containers or on flat racks, or by air on freighter main deck positions when time is short. Both modes need a crated, shock-protected load and a final air-ride truck leg to the hospital. The load plan should be checked against door height and weight limits before booking.

Which aircraft can carry large medical equipment?

Main deck freighters such as the 747-8F, 777F and 767-300F take tall or heavy crates that will not fit lower deck ULDs. Outsize pieces may need a nose door aircraft. The aircraft pages in the references list payload and pallet positions.

How can I track a spare part sent by air?

Use the air waybill number, which is an 11 digit number starting with the airline's three digit prefix. AirCargoMCP shows the airline events for it in one timeline, from acceptance to departure, arrival and delivery. Status codes differ between airlines, so read them with the airline's own definitions.

Do medical devices with batteries count as dangerous goods?

Devices with lithium batteries are Class 9 dangerous goods when shipped by air or sea, under UN3480, UN3481 and related entries. Packing, marking and shipper declaration depend on whether the battery is packed with or contained in the equipment. Check the IATA or IMDG rules and the battery test summary before booking.

What is the HS code range for medical devices?

Most medical instruments, imaging equipment and implants fall in HS Chapter 90, mainly headings 9018 to 9022. Some disposables are in Chapters 30, 39 or 40, and sterile sutures are in 3006 or 3005 depending on the product. Confirm the subheading with your customs broker, since the rate and licence requirements depend on it.