Skip to content
Navo24Navo24

Swap body (Wechselbrücke).

A swap body is a load carrier that is detached from the truck and stands on its own folding legs. It is built to pallet width, uses the same fittings as an ISO container and can travel by road and rail. It is the most widely used transport technology in continental European combined transport.

Intermodal and specialEN 284
Swap body: Wechselbrücke mit sia Abrasives-Beschriftung an einer Laderampe der sia in Fraue
Photo: JoachimKohler-HB, CC BY-SA 4.0, Wikimedia Commons
Swap body: Nufam 2023 at Messe Karlsruhe, Rheinstetten
Photo: Matti Blume, CC BY-SA 4.0, Wikimedia Commons
Swap body: Camera location52° 19′ 12.3″ N, 9° 47′ 59.75″ E View this and other nearby image
Photo: Matti Blume, CC BY-SA 4.0, Wikimedia Commons
parked on legs
Navo drawing, schematic, not to scale

Load unit that sits on four fold-down legs. The rigid truck lowers its air suspension and drives out from under it, so the body waits at the customer while the truck keeps working. Moves by road and rail in Europe; class C units are sized to European pallets.

What it is

A swap body (German: Wechselbrücke or Wechselbehälter) is a cargo unit that the truck sets down and picks up without a crane. Its corner fittings and locking dimensions match those of an ISO container, so swap bodies and ISO containers can be carried on the same vehicles without conversion. Compared with an ISO container it offers a pallet-friendly inside width and more flexible dimensions, but unlike a container it is not approved for sea transport.

How it is set down and picked up

Swap bodies have four folding legs on the sides. By releasing air from the bellows of the air suspension, the truck lowers itself, drives under the parked body, lifts it by raising the suspension and drives off once the legs are folded up. Setting down works the other way round, so no forklift or crane is needed at the customer. The legs can be telescopic, giving set-down heights of 820 to 1320 mm. A drawbar truck can also pick up a body with its trailer, though reversing the trailer under it takes practice, precision and space.

Sizes and pallet capacity

The class C swap bodies are standardised in EN 284. The common sizes are C715 (7.15 m long, 17 euro pallets, empty about 2.2 t), C745 (7.45 m, 18 euro pallets, about 2.35 t) and C782 (7.82 m, 19 euro pallets, about 2.45 t). They are 2.55 m wide and 2.75 m high without legs, with a permitted gross mass of 16 t.

Class A swap bodies to EN 452 are semi-trailer length units. They fit semi-trailer chassis and container rail wagons but, unlike class C, have no folding legs. A tunnel recess at the front underside takes the bracing of the semi-trailer above the coupling.

Variants

Like mega trailers, there is a jumbo swap body with 3 m clear inside height and a lifting roof. Box and reefer box swap bodies are also built, some with a double-deck loading system that uses the volume better when pallets are low.

When to book it

Book swap bodies for regular flows where the body can be left at a site for loading or unloading while the truck moves on, or for combined road and rail transport. Give the carrier the pallet count so the right size (17, 18 or 19 euro pallets) is chosen. Road rates for this equipment can be compared at rates.navo24.com.

Variants

Class C swap body7.15 to 7.82 m long with folding legs; carried mainly on rigid trucks and drawbar trailers.
Class A swap bodySemi-trailer length unit without legs, for semi-trailer chassis and rail wagons.
Jumbo swap body3 m clear inside height with a lifting roof.
Box and reefer swap bodyClosed or temperature-controlled bodies, some with a double-deck loading system.

Questions shippers ask

How many euro pallets fit in a swap body?

17 in a C715, 18 in a C745 and 19 in a C782.

Do I need a forklift or crane to unload the body from the truck?

No. The truck lowers its air suspension and leaves the body on its folding legs. You still need a forklift or pallet truck for the goods inside.

Can a swap body go by rail?

Yes, if it is fitted for rail transfer: bodies approved for container rail wagons carry two code plates showing their profile code. Sea transport is not possible.

Sources

Drawing by Navo, schematic, not to scale. Photos from Wikimedia Commons under the license shown under each photo.

Track a container

Container, B/L or booking number. 240+ carriers, live status and ETA.