Skip to content
Navo24Navo24

Walking floor trailer.

A walking floor trailer, also called a moving floor trailer, has a hydraulically driven floor made of slats that conveys the load out of the rear. It unloads loose bulk without tipping and moves pallets without a forklift entering the trailer.

Bulk and tank trailersMoving floor
Walking floor trailer: Oplegger met schuifvloersysteem, lading potgrond
Photo: Cargo Floor, CC BY-SA 4.0, Wikimedia Commons
Walking floor trailer: Close up vloer ingebouwd in een oplegger
Photo: Cargo Floor, CC BY-SA 4.0, Wikimedia Commons
Navo drawing, schematic, not to scale

Box trailer whose floor is three sets of slats driven by hydraulics. Moving together they carry the load backwards, then return one set at a time, so the trailer unloads itself without tipping.

What it is

A moving floor is a hydraulic conveyor built into the trailer floor. It can move bulk material or palletised products, and the same system is also used in warehouses and at loading docks. In a trailer it lets the driver unload loose material without tipping the trailer or tilting the floor.

How the floor works

The floor is divided into three sets of narrow slats, with every third slat connected. When all three sets move together, the load moves with them in the chosen direction. To bring the slats back, only one set moves at a time; the friction of the load on the two stationary sets keeps the load in place while the third set slides back.

A version made for pallets uses only two sets of slats: one set lifts the load slightly so the other can retract, then both move together.

Unloading time and site access

Unloading a full 13.6 m (45 ft) trailer takes about 5 to 15 minutes and needs less manpower and equipment than unloading without the system. Because the body does not rise, the truck can drive through a narrow, low gate and unload inside a building, which is often not possible with a tipper or dump trailer.

An optional movable front wall with a rubber flap, or a simple flap or tarp at the front of the bed, pushes the last material out so the floor hardly needs sweeping. Full-width or full-length pallets can be handled without opening the trailer sides.

Typical cargo

Walking floors are used for loose bulk and for waste. At waste facilities they reduce double handling, because any vehicle can deliver onto the conveying floor, and for bagged waste the system can be combined with bag openers. Palletised goods can also be loaded and unloaded without a forklift entering the trailer.

When to book it

Book a walking floor trailer when the receiver has no tipping space, has low or narrow entrances, or wants bulk or pallets pushed out at the rear without a forklift inside the trailer. Tell the carrier the material and whether it is loose or palletised. Road rates for this equipment can be compared at rates.navo24.com.

Variants

Bulk walking floorThree slat sets for loose material, often with a movable front wall or tarp.
Pallet moving floorTwo slat sets; one lifts the load so the other can retract.

Questions shippers ask

Can a walking floor trailer unload inside a hall?

Yes. The body does not rise, so the trailer can enter a narrow, low gate and unload inside, which a tipper often cannot.

How long does unloading take?

About 5 to 15 minutes for a full 13.6 m (45 ft) trailer.

Can it carry pallets?

Yes. The floor can convey palletised goods so no forklift has to enter the trailer.

Sources

Drawing by Navo, schematic, not to scale. Photos from Wikimedia Commons under the license shown under each photo.

Track a container

Container, B/L or booking number. 240+ carriers, live status and ETA.