Skip to content
Navo24Navo24

Shimmns coil wagon.

The Shimmns is a covered flat wagon with troughs that hold steel coils lying on their side. Steelworks and coil processors use it because the coils travel secured and dry, and are lifted in and out by crane.

Shimmns coil wagon: photo 1 from gueterwagenkatalog.dbcargo.com
Photo: gueterwagenkatalog.dbcargo.com
Navo drawing, schematic, not to scale
Shimmns coil wagon: photo 2 from gueterwagenkatalog.dbcargo.com
Photo: gueterwagenkatalog.dbcargo.com
Shimmns coil wagon: photo 3 from railrent.com
Photo: railrent.com
Shimmns coil wagon: photo 4 from cargowagon.sk
Photo: cargowagon.sk

Special flat wagon with cradles for steel coils laid horizontally (index h) and a movable hood or tarpaulin cover with fixed end walls (index i). The UIC standard types are Shimms (four axles) and Sahimms (six axles); most now carry lighter tarpaulins instead of steel hoods.

What a coil wagon is

The Shimmns is a special flat wagon with bogies (class S). Its floor carries cradles or troughs for coils laid horizontally (index h). Most versions have fixed end walls and a movable cover of tarpaulin or telescopic hood (index i).

Four- and six-axle coil wagons of the type S…hmm… are available in large numbers. The Shimmns 708 of Deutsche Bahn is the most common German S wagon.

Design and loading

Heavy-load S wagons are built so that their payload is limited by the line class, not by the wagon itself. To keep bending low they are relatively short, which is why most carry the letters mm.

To load, the cover is pushed together and a crane lowers the coils into the troughs. The cover is then closed over the load. The UIC standard designs originally had steel telescopic hoods; most now carry lighter tarpaulins instead.

Dimensions and capacity

The UIC standard four-axle Shimms (Shis until 1979) measures 12.04 m over buffers with bogie centres 7.0 m apart, a loading length of at least 10.8 m and a maximum tare of 22.0 t.

The six-axle Sahimms (Sahis until 1979) measures 15.0 m over buffers with bogie centres 8.0 m apart, a loading length of 13.76 m and a maximum tare of 34.0 t. The Shimmns 708 of DB weighs about 23 t empty and can carry coils of about 67 t in total on line class D4.

Class S wagons for heavy loads are built so that the line class, not the wagon, limits the load. To keep sag low they are fairly short, which is why many carry the index letters mm (very short loading length). Six-axle coil wagons of the Sahimms type have been used in Germany since the 1980s, four-axle ones since the 1970s.

Where they are used

Coil wagons serve steel traffic between rolling mills, service centres and steel users. In Germany the UIC standard types have been in service since the 1970s (four-axle) and the 1980s (six-axle). Covered coil wagons share the market for heavy, dry loads with opening-roof wagons of class T.

Typical flat wagon cargo in the sources includes vehicles, engines, large pipes, steel beams, wire coils and semi-finished steel such as sheets, coils, pipes, bars and plates. Coil wagons take the coil share of that traffic. Some have fixed end walls and removable covers in the form of tarpaulins or telescopic hoods.

The class letters

S is a special flat wagon with bogies. h means fitted for coils laid horizontally; hh would mean coils standing upright. i means fixed end walls with a movable cover. mm means a very short loading length, under 15 m for four axles. n means a load limit above 60 t, and s permits 100 km/h. A leading a, as in Sahimms, means six axles.

Choosing a coil wagon

Check coil weight, diameter and orientation: the h types take coils lying flat, hh types take them upright. Confirm the load table for your line class, since the payload depends on the route. If coils must stay dry, ask for a covered version and check whether it has a tarpaulin or a hood.

Variants

Shimms (Shis until 1979)UIC four-axle coil wagon with hood, 12.04 m over buffers.
Sahimms (Sahis until 1979)UIC six-axle coil wagon, 15.0 m over buffers.
Shimmns 708Most common German S wagon, about 67 t of coils on D4 lines.
S…hhmm…Versions for coils standing upright (index hh).

Questions shippers ask

What does h mean in Shimmns?

The wagon has cradles for coils laid horizontally. hh would mean coils loaded upright.

How much can a Shimmns carry?

The DB Shimmns 708 carries about 67 t of coils on line class D4, at about 23 t tare.

Are coil wagons covered?

Most have fixed end walls and a movable cover. Many now use tarpaulins instead of steel hoods.

Sources

Drawing by Navo, schematic, not to scale. Photo credits are under each photo.

Track a container

Container, B/L or booking number. 240+ carriers, live status and ETA.